How to Connect to SmartThings on your Samsung Dryer
Please Note: The information on this page is for Australian products only. Models, sequences, error codes or settings will vary depending on location and/or where the product had been purchased. To be redirected to your local support page please click here.
The SmartThings* App conveniently controls and manages smart home appliances and Internet of Things (IoT) devices with a smartphone. From the outside, you can monitor and control the status of various devices, such as smart devices, home appliances, TVs, speakers, etc. registered on the server. It is a next-generation platform service that will unify Samsung's products as an open source platform that can connect not only our products but also other IoTs.
NOTE: The SmartThings App is available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required. Data fees may apply.
*SmartThings is compatible with the following dryer models:
DV10N8520GV/SA, DV10R8540GV/SA, DV10T9720SV/AU, DV10T9720SV/SA, DV80T5420AB/SA, DV80T5420AW/SA, DV80T6420LE/SA, DV90N8288AX/SA, DV90N8289AW/SA, DV90T6440LE/SA, DV90T7440BT/SA, DV90T8440SB/SA, DV90T8440SH/SA, DV90T8440SX/SA
Checking the requirements for connection
Before connecting your smartphone with your dryer, ensure that the following requirements are met:
|
Android
|
iOS(iPhone) |
|
|---|---|---|
|
OS
|
Android 6.0 or more |
iOS 10.0 or more |
|
Device Type
|
Smartphone, Tablet |
iPhone 6 or more, iPad |
|
RAM Size
|
2GB or more |
2GB or more |
|
Support Resolution
|
1280 x 720(HD) 1920 x 1080(FHD) 2560 x 1440(WQHD) |
1334 x 750 1920 x 1080 |
|
App Preload Criteria
|
RAM 2GB or more Bluetooth profile 4.0 or higher Terminal capable of Wi-Fi mirroring |
RAM 2GB or more Bluetooth profile 4.0 or higher Terminal capable of Wi-Fi mirroring |
Steps to Connect to SmartThings:
Please ensure that your smartphone is connected to WiFi , and that the SmartThings App is installed. You will also need to setup a Samsung Account if you have not yet already.
NOTE: Settings may vary by phone and software version.
1. Open the SmartThings App, and tap the '+' (plus sign) on the top right to add a device.
2. Tap on 'Add device'.
3. Select 'Add' under 'Samsung devices'.
4. Scroll down and select 'Dryer'.
5. If your Dryer has a QR Code, use the camera to detect it. Otherwise, tap 'Add without QR code'.
6. Make sure Dryer is on and then hold the 'Smart Control'
button on your Dryer for at least 3 seconds until 'AP' appears on the display.
7. Once detected, tap on your Dryer.
8. Allow SmartThings to connect to your Dryer. If a pop-up occurs, tap 'Connect'.
9. Select the Wi-Fi you would like to connect your Dryer to.
10. Wait for SmartThings to register your Samsung account with your Dryer.
11. Edit the Location, Room, Device name, or set as favourite. Once finalised, tap 'Done'.
For further assistance, please contact our Chat Support. To find your Samsung product's User Manual, head to Manuals & Downloads.
Thank you for your feedback!
Please answer all questions.
Contact Info
Contact us
Join Members Community
![]()
![]()
